Product Description
The whole machine has its own booster system plug hole section, which is suitable for high viscosity ink/resin plug hole. It adopts well-known electrical hardware configuration at home and abroad, is equipped with advanced design concepts and stable mechanical structure ratio, and is supported by a number of patented technologies. Ensure stable and reliable production and operation of products.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: AirTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
Squeegee pressure uniformity: ≤5kgf
Minimum processing size: 350mm×400mm
Printing pitch: 0～10 mm
Board thickness range: 0.8-4.0mm
Clearance from the board: 0～10mm
Printing speed: 30～300 mm/sec adjustable
Fine adjustment of screen frame: X, Y, θ±5mm
Maximum screen frame size: 1200×1100mm
Fixed screen frame: fixed at six points
Minimum screen frame size: 800×800mm
Covering/scraping angle: ±15°
The smallest plug hole diameter: ≤ 0.20mm
Scratch stroke: servo 0～900 mm adjustable
Table top level accuracy: ±0.1mm/m2
Equipment power: 3 KWH
Plug hole accuracy: ±0.02mm
Equipment size: 1500×1700×1900 mm
Product Performance
Supporting pressurization system to maintain pressure balance, the kilogram air pressure can reach 8-12KG
The self-locking function is set mechanically to ensure the stability and balance of the plug hole
High-viscosity ink/resin can be filled in one stroke
Four-column power lifting system, high mechanical strength, good rigidity, and strong stability
Product Description
The whole machine has its own booster system plug hole section, which is suitable for high viscosity ink/resin plug hole. It adopts well-known electrical hardware configuration at home and abroad, is equipped with advanced design concepts and stable mechanical structure ratio, and is supported by a number of patented technologies. Ensure stable and reliable production and operation of products.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: AirTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
Squeegee pressure uniformity: ≤5kgf
Minimum processing size: 350mm×400mm
Printing pitch: 0～10 mm
Board thickness range: 0.8-4.0mm
Clearance from the board: 0～10mm
Printing speed: 30～300 mm/sec adjustable
Fine adjustment of screen frame: X, Y, θ±5mm
Maximum screen frame size: 1200×1100mm
Fixed screen frame: fixed at six points
Minimum screen frame size: 800×800mm
Covering/scraping angle: ±15°
The smallest plug hole diameter: ≤ 0.20mm
Scratch stroke: servo 0～900 mm adjustable
Table top level accuracy: ±0.1mm/m2
Equipment power: 3 KWH
Plug hole accuracy: ±0.02mm
Equipment size: 1500×1700×1900 mm
Product Performance
Supporting pressurization system to maintain pressure balance, the kilogram air pressure can reach 8-12KG
The self-locking function is set mechanically to ensure the stability and balance of the plug hole
High-viscosity ink/resin can be filled in one stroke
Four-column power lifting system, high mechanical strength, good rigidity, and strong stability
粤公网安备44000000000000号
